Welcome: Yancheng Hydraulic Core I&E Co., Ltd.

daisy_hydraulic@163.com +86-19040220553

Company news


DIN 2353 vs JIC 37° vs ORFS: How to Choose the Right Hydraulic Fitting

A hydraulic system fails at its weakest joint, and in most cases that joint was specified by habit rather than by engineering. Four sealing systems cover the majority of hydraulic connections in use today — DIN 2353, JIC 37°, ORFS and the threaded port types BSPP and NPT. They are not interchangeable, and mixing them up is one of the most common causes of a leak at first start-up.

DIN 2353 (ISO 8434-1) — the bite-type ferrule system The European standard, built around metric tube outside diameters. A nut drives a ferrule into the tube, which cuts a bite and forms a 24° metal-to-metal seal. It is available in light (L) and heavy (S) series; the S series uses a thicker tube wall and therefore carries a higher working pressure at the same tube size. Fittings are typically carbon steel with zinc plating or 304 / 316 stainless, and they dominate machine tools, European mobile equipment and general industrial plant.

JIC 37° (SAE J514 / ISO 8434-2) — the American flare A 37° flare on the tube or hose end seats against a matching cone in the fitting body. Inch tube sizes with UNF threads, metal-to-metal sealing, and a reputation for being easy to assemble and easy to inspect. It is the default choice on North American mobile equipment and is widely used worldwide on high-pressure lines where a visual check of the flare is useful.

ORFS (SAE J1453 / ISO 8434-3) — the vibration answer An O-ring seats on the flat face of the fitting rather than on the threads, so hydraulic pressure never travels through the thread path. Under constant pressure pulsation — pump outlets, breaker circuits, deck machinery — the seal does not rely on thread torque to stay tight, which is why ORFS has become the standard for high-vibration, high-pressure mobile applications.

BSPP and NPT — the ports, not the lines BSPP (ISO 228) is a parallel thread that seals on a bonded washer at the shoulder; NPT (ANSI B1.20.1) is a tapered thread that seals on the threads themselves with sealant. They look similar and are frequently confused. A BSPP male will start into an NPT female, will feel as though it is tightening, and will leak. Check the thread pitch before you assemble anything.

Before you order

Three questions decide the specification: the tube outside diameter and wall thickness, the thread standard at the port, and the working pressure with its safety factor. Send us a photo of the part or a drawing with those three answers and we will identify the fitting against the standard and quote from stock.

HYDRAULIC CORE (Yancheng Hydraulic Core I&E Co., Ltd.) supplies DIN 2353, JIC 37°, ORFS, BSPP and NPT fittings, SAE Code 61 / Code 62 flanges, crimped hose fittings, hose assemblies and ISO 7241 quick couplings — in carbon steel and 304 / 316 stainless, mixed in one container. Email: daisy_hydraulic@163.com | WhatsApp: +86 19040220553 | www.hydrauliccore.com

No previous article No next article

CATEGORIES

CONTACT US

Contact: Daisy Wang

Phone: +86-19040220553

Tel: +86-19040220553

Email: daisy_hydraulic@163.com

Add: Wuzhou International, Jianhu County, Yancheng City, Jiangsu Province, China

Top